Archive for June 2011

Creating jffs2 image

By on June 18, 2011
This entry is filed under Embedded Linux.

 Hello people!   Last time I wrote that we had some problems in generating jffs2 file system image. So I read on the internet about a bug when using -v option in mkfs.jffs2. I tried to generate the jffs2 image by taping the command and I think that I got it. Continue reading Creating jffs2 image

Compiling uClinux with kernel linux-2.6.21

By on June 14, 2011
This entry is filed under Embedded Linux, LPC2468, toolchain. | 1 Comment

Hello everybody!

Today I’ll show you what I did to compile the kernel.. First of all I’m assuming that you
have already installed build-essentials and mtd-tools packages.
Now let’s begin the hard work! =D Continue reading Compiling uClinux with kernel linux-2.6.21

Toolchain for ARM

By on June 10, 2011
This entry is filed under Embedded Linux, LPC2468, toolchain.


Hi people,
I’m following some instructions from Embedded Artists to build my own toolchain, compile and upgrade board’s u-boot.  Continue reading Toolchain for ARM

Embedded artists LPC2468 demo board

By on June 10, 2011
This entry is filed under Embedded Linux, LPC2468.

Hi people,
I’m currently working on the LPC2468 board from Embedded Artists. This is an overview of the board and processor:

LPC2468
– Processor ARM7TDMI-S core with speed up to 72 MHz
– 512 KB internal flash
– 98 KB RAM
– 4xUART, 3xI2C, 2xCAN, 1xSPI, 2xSSP, 1xI2S
– Full-Speed USB 2.0 Device/Host/OTG
– 10/100 Ethernet MACBoard Continue reading Embedded artists LPC2468 demo board

First Post!

By on June 10, 2011
This entry is filed under computer vision, Embedded Linux, FPGA, VHDL.

Hello folks!

This is my very new post here. Before we start, let me present myself. My name is Marcelo I’m from Brazil but I live in Canada since 2007 (so, I’m sorry for my bad english lol). I’m an electronic engineer graduated at UTFPR in 2003 and I work with electronics since 2001. Continue reading First Post!